Writer’s Note: I am excited to share that my little French Lavender Table Transformation was featured as an Editor’s Pick on BlogHer!! To view that post, click here:
Now, onto the transformation! With some pieces of old furniture, I choose the style and color of the makeover according to my needs. Some pieces tell me what they need to be. This little table needed to be the center of attention in a lovely lavender French boudoir.
We purchased it at auction and I could have chosen to paint it red or black or green, but Behr Lavender Lily seemed to be just the perfect, soft color for this delicate little beauty. Here is the how-I-did-it:
1. Cleaned and lightly sanded the entire piece. It was pretty dusty and dirty and topless-must have been a long, crazy trip from Paris!
2. The base coat of paint was quite adhered and sturdy other than a few chipped edges, so I just sanded them, added a primer for the top and simply painted over it. Look at the sculpted details here!
First 2 coats, Behr Lily Lavender.
3. Added a glaze of Behr Ridge View paint mixed with Martha Stewart Glaze Effects to highlight all of the exquisite detail on the legs, drawer and back.
I mixed it together in a 4 to1 ratio (glaze to paint) then painted it on (working in small sections because it dries pretty quickly),
then wiped it off, leaving the glaze where I wanted it to remain as a highlight.
4. In the past, I have used waxed paper for my transfers, but this time I tried freezer paper instead.
The freezer paper is a little heavier and easier to work with than the waxed paper. There are two sides, a matte side and a shiny “plastic-coated” side.
You want to print the graphic (thanks, Graphics Fairy : ) on the shiny side, in reverse! In this case, I wanted to use a small graphic to decorate the center of the table top, so I would be able to place things on it without completely hiding the picture.
5. Once printed, allowed to dry for a short time. DO NOT TOUCH IT or it will smear. Lightly dampened the painted surface.
or the graphic will come out all smeary and then you have to wipe it off and repaint it and start over again. Ok, well, that happened to me. More than once. So DON’T DO THAT.
6. Gently and carefully placed the graphic straight down onto the surface, then affixed with painter’s tape to create a “hinge” at the top.
This allows you to check your progress without moving the graphic around and messing up the picture. WARNING: you only get one shot at this. If you attempt to moved the transfer around once it has touched the painted surface, you will need to start over. Ok, well that happened to me too. More than once. So DON’T DO THAT.
7. Once the transfer had successfully landed on my piece, I used a blunt object to rub the surface using firm pressure. I used the back of a spoon but I have seen others using credit cards (I prefer to use those at HomeGoods).
This takes a minute or so to complete the transfer. Just keep rubbing all over, and check periodically by lifting the corner and then placing back down in the exact same spot. Hence, the tape hinges. Removed the paper from the design once I was happy with the transfer. Allowed to dry.
8. Once the piece had dried, I applied a coat of Fidde’s Supreme Wax
to protect the entire piece and provide a nice, glowing finish. Wiped it on, buffed it off with a soft cloth.
9. Drilled the hole for the antique brass pull
My new precious French Provincial side table is magnifique!? Oui? This technique is pretty fool-proof as long as you allow time to dry between steps and follow the transfer instructions. But, before you transform a piece, make sure you really look at it to decide what it needs to be. Have a Bon Mardi, everyone! Susan