Antiqued Mirror on the Wall

Who’s the fairest (and most rustic, vintage and gorgeous!) of them all? This mirror was another “throw-away” Coach found “somewhere”. I don’t ask anymore. It’s like a magic cupboard-I need something, I open up the barn door and voila! Instant DIY subject! Today’s project was this old, dirty, chipping and peeling dark brown mahogany mirror. Despite it’s sorry, drab exterior in dire need of some TLC, the actual structure itself was totally solid and quite heavy, I might add. I transformed it from this in a few simple, easy steps.

Here is the How-I-Did-It: 1. Cleaned the mirror and frame thoroughly with heavy duty cleanser. The mirror is not in perfect condition, but that’s fine by me. Adds to the charm, and it stills reflects the light, which is most important. Lightly sanded the frame just to remove any loose particles of old varnish.

2. Primed with Gripper by Glidden. LOVE this stuff. Seals in stains, odors, evens the color and preps the wood to accept the topcoat.

3. Painted with one coat of Glidden Antique Beige

that I added my “chalk-like-paint” mixture to. It is a nice, soft, matte finish that accepts glazes and waxes very well. That recipe here:

4. Added the unfinished medallion to the top for detail.

I purchased this one at Michaels for a couple of bucks. Just glued it on with Gorilla Glue . You have to brush it on, then weight it down

and wait until it’s dry to ensure a good solid bond. Then I painted it with the same Glidden top coat and allowed to dry.

5. Lightly sanded the whole mirror frame and detail to expose some of the dark wood beneath.

6. Painted on this Antique Wax in Scrub Pine from General Finishes. I like this one because you don’t have to work it in with a rag. You literally paint it on!

Brushed it on with a foam brush, then wiped off with a rag, leaving the dark wax in places to enhance all of the crevices and lines and detail.

It leaves some color, but it also adds a nice matte finish to the entire piece. Allowed to dry.

7. Scraped off the excess paint and stain insdie the frame of the mirror. Cleaned the mirror.

8. Here is the finished closeup of my antiqued mirror. I love it, but what do you think? Should I have left it alone or did I give this piece some love? (BTW, if anyone knows the trick to photographing mirrors without me being in the shot, I would love to hear it!!!)

This is a very simple DIY project, it just takes some time and a little patience to allow each layer to dry before adding the next. If you are thinking of trying this process, test it out on a sample piece of wood before taking on a big, detailed mirror or frame. But remember, it’s supposed to look old and messy, so perfection is not an option! Sometimes a little messy is a good thing… Hope you have a reflective Thursday, everyone! Susan